#611A- Quick Chop Plus

机器的操作如下:

1. Using a luminescent crayon, the operator marks a board for defects and places the board on the stops. These crayon marks will not appear on the finished material once its been processed.
2. With the push of a button the chop saw operator can select which cutting bill to use on the board. Unlike the slow ‘paddle’ measuring/defecting technique, the operator does not have to walk from one end of the board to the other to determine the board’s length.
3. The board is then released, and it drops down to the fence, inside of the Safety Cage. The pusher scans the board for length and the location of the crayon marks as it travels to the end of the board.
4. The board is then fed into the saw and cut at the optimum positions based on the data entered into the cut list.

因为董事会被裁掉了, 操作员可以标记下一块板, place it on the stops and select the next cutting bill, so that it can be scanned immediately the instant the previous board is finished. There is very little wasted time in-between boards, maximizing production of the machine.

Customers who will benefit from the Quick Chop:

• 中小型商店.
• Those who currently have operators using manually operated chop saws.
• 高品质木制品制造商.
• 门和面框制造商
• 楼梯及踏面制造商
• 家具零部件制造商

Under normal running conditions, the Quick Chop Plus can process a quantity of (4) 8 ft. long boards per minute, assuming a maximum of 5 cuts. Corresponding 生产 Numbers are as follows:

• (1)小时= 1900线性小时.
• (8)小时工作制
  • 假设(7)工作时间= 13000 +线性时间.
• 10小时工作制
  • 假设(9)工作时间= 17000 +线性时间.

• 电源要求(需要三相)
  • 220V = 30安培
  • 480V = 15安培
• 空气的要求
  • 1/4″航空公司= 5 SCFM @ 90 psi
• 锯片切割能力
  • 14″直径/ 1″内径
    • 4/4材质= 8.5“宽
    • 8/4材质= 7″宽
  • 18″直径/ 1″内径
    • 4/4材质= 13″宽
    • 16/4材质= 10″宽
• 锯臂式电动机
  • 7.5 Hp
• 最大物料长度容量
  • Offered in 12, 16, 20, and 24 ft Length Options
• 集尘
  • 1 × 4″防尘口
  • 400 CFM

剁手的优势:

• 提高砧木的产量
• 更高的生产
• 自动理料
• 更好的一致性切长度

相对于其他系统的优势:

• Simple and quick Luminescence crayon marking is used for defects or grading
• Unique design enables operator to be marking two or more boards ahead of the board being chopped. 这就等于更高的生产率.
• 通过品位共享提高产量
• 精度在+/- 0以内.010
• Quick Chop uses a full featured computer system, not just a keypad
• Pneumatic saw actuator is fast and delivers a smooth operation cycle for accurate and quality cuts.
• Welded one-piece steel frame allows the Quick Chop to ship set up. 一个下午安装完毕

Material handling is an important concept to consider to help make machinery more efficient. Cameron Automation offers a number of different solutions, 配合你的快刀, that will help the operators handle the large number of parts that will be cut on this machine.

#918A皮带输出

Cameron #918A皮带输出 offer a number of different solutions and layouts to fit your needs. 对于单个操作人员的工作单元，6英尺. 宽12英尺. long belt makes a lot of sense (Pictured above and left). 当快刀在切的时候, the outfeed belt is moving material away from the outfeed and in an area where an operator can organize and stack parts. A different strategy, in shops where work cells are spaced out, is to use a 24″ wide x 30 Ft. Long belt to convey material away from the Quick Chop automatically, 到下一个区域的材料需要. Manufactured here in our Factory in Poughkeepsie, NY, 我们很乐意为您制作适合您需要的皮带.

—————————————————————————————————————————————————————————–

#613A-倾斜捕捉台

The Tilting catch table is a space saving design for those shops with a limited open area for their Chop work cell. It’s designed to be managed by a single operator. The Quick Chop will cut an entire board and push it out onto the outfeed table like normal. The machine will hesitate briefly while the cylinders raise the table up to horizontal, 与机器的平工作高度相匹配, 把整个板子都推出去. There is space for a multiple boards to be accumulated as the machine is running, to build up an inventory that the operator will need to organize.